Connect FTP on Fujifilm X-H2S to send your photos

Prerequisites for FTP transfer on Fujifilm X-H2S

Before starting, make sure you have the following to set up FTP on your Fujifilm X-H2S.

1. A Snapdelivr account with a gallery created (FTP settings are in the gallery tab).
2. Your Fujifilm X-H2S with a charged battery and memory card inserted.
3. An available Wi-Fi network (home router, venue Wi-Fi, or your phone's hotspot).
4. Your gallery's FTP settings: server (host), port, username, password, and path.

Good news: the Fujifilm X-H2S has built-in FTP — no external transmitter needed.

Step by step: set up FTP on Fujifilm X-H2S

Follow these steps to configure the FTP connection on your Fujifilm X-H2S:

1. Turn on your Fujifilm X-H2S and access the main menu.
2. Navigate to Menu → Connection setting → FTP transfer → Configure server.
3. First connect your camera to the Wi-Fi network: select your network and enter the Wi-Fi password.
4. In the FTP server settings, enter your Snapdelivr gallery settings: server (host), port (21 for standard FTP), username, and password.
5. If the option is available, enable passive mode (our server uses it automatically).
6. Confirm the connection. Your Fujifilm X-H2S should confirm the FTP server connection is established.
7. Enable automatic transfer if available: each photo you take will be sent automatically to your gallery.

The X-H2S supports 5 GHz Wi-Fi, rare for Fuji. Use this band for noticeably faster event transfers.

Using your phone's hotspot at events

On location (weddings, concerts, events), Wi-Fi isn't always available. Use your phone's hotspot to send photos from your Fujifilm X-H2S.

1. Enable hotspot (tethering) on your smartphone: Settings → Personal Hotspot.
2. On your Fujifilm X-H2S, connect to your phone's Wi-Fi network (like any other network).
3. Since FTP is already configured, photos will be sent over your phone's 4G/5G to your Snapdelivr gallery.

The Fujifilm X-H2S uses Wi-Fi 5 GHz / 2.4 GHz. Make sure your mobile plan has enough data and your phone is plugged in or well charged.

Troubleshooting common issues

Here are the most common issues when setting up FTP on the Fujifilm X-H2S and how to fix them.

1. 'Server connection failed': check that the server, port, username, and password are correct. Watch for extra spaces.
2. 'Cannot connect to Wi-Fi': make sure the network is in range and the password is correct. Try restarting the camera's Wi-Fi.
3. 'Slow or interrupted transfer': move closer to the router/hotspot, switch to JPEG instead of RAW to reduce file size, or use the 5 GHz band if your Fujifilm X-H2S supports it.
4. 'Photos not received in gallery': check the FTP path in settings. It must match exactly what's shown in your Snapdelivr dashboard.